Build a room divider

Transform a large room in no time into two visually distinct regions.

Material
1 x furniture board (1711 x 300 x 19 mm), side panel
1 x furniture board (1730 x 300 x 19 mm), side panel
1 x furniture board (2062 x 300 x 19 mm), body base
7 x furniture board (376 x 250 x 19 mm), short shelf
1 x furniture board (479 x 300 x 19 mm), cover long
36 x connecting screws (5.7 x 50 mm)
36 x shelf support
3 x furniture board (481 x 250 x 19 mm), long shelf
1 x furniture board (1146 x 300 x 19 mm), side panel
1 x furniture board (864 x 300 x 19 mm), side panel
4 x furniture board (374 x 300 x 19 mm), cover short
24 x caps
5 m edge band
1 x furniture board (600 x 300 x 19 mm), side panel
1 x furniture board (1429 x 300 x 19 mm), side panel

How to build

1st step
All body parts lay upright on a level surface. Ensure that all parts are with tons profile down. Gradually, the individual elements of the respective compartments at right angles are aligned and fixed by means of angle clamps.


2. step
Draw (flush with the side panels) for the compounds according to the respective marks on the side panels, the cabinet lower part, and the long and short covers. Drilling carried out at intervals of about 5 cm to the outer edge of the side panels. The connection is then made with the connecting screws.


3. step
Between the two longest sides a shelf is long screwed in approximately 86 cm in height to support the stability of the shelf.

4. step
Place the rack on. Set it in the range of the longest side part at right angles and check has been respected with a long spirit level or a bar if the pitch angle 35 °. Draw the markings on the shelf supports at the desired height. Measure. Please always from below, taking into account the lesser depth of soils Carefully the drilling and set up the shelf supports. Make sure that the orientation of the barrel profile of the shelves and other parts of shelves is identical.